START UP |
PAG. 10
5. START UP
5.1 LEVELS
Check all levels of the equipment.
Hydraulic oil level: it can be checked by looking at the indicator that is on the
front side of the oil tank (under the motor). lt must be done when the tower is
resting and it has to be at least % of the total.(
Hydraulic oil temperature: this level also incorporates a Mercury temperature
meter in the center thereof so that the customer can respect working properties
of the oil. Some oils can lose properties above or below certain temperatures.
For water, oil and diesel levels of the genset, see generating set manual.
Fig.1
5.2 ANCHORAGE
As described in the safety chapter, do not raise the mast before opening the
levelling feet and stabilizing the tower on a firm and regular surface, in order to
do so, follow the steps bellow:
•
Take out the safety brackets of the pins. (Fig. 2)
•
Pull out the pins vertically. (Fig. 2)
Fig.2
RAMIRENT
