HIMA HIQuad H41X, System Manual

Page: 8 / 110

Introduction System
Page 8 of 110 HI 803 211 E Rev. 1.01.00
1.3 Writing Conventions
To ensure improved readability and comprehensibility, the following writing conventions are
used in this document:
Bold To highlight important parts.
Names of buttons, menu functions and tabs that can be clicked and used
in the programming tool.
Italics Parameters and system variables, references.
Courier
Literal user inputs.
RUN Operating states are designated by capitals.
Chapter 1.2.3 Cross-references are hyperlinks even if they are not specially marked.
In the electronic document (PDF): When the cursor hovers over a
hyperlink, it changes its shape. Click the hyperlink to jump to the
corresponding position.
Safety notices and operating tips are specially marked.
1.3.1 Safety Notices
Safety notices must be strictly observed to ensure the lowest possible risk.
The safety notices are represented as described below.

Signal word: warning, caution, notice.

Type and source of risk.

Consequences arising from non-observance.

Risk prevention.
The signal words have the following meanings:

Warning indicates hazardous situations which, if not avoided, could result in death or serious
injury.

Caution indicates hazardous situation which, if not avoided, could result in minor or
moderate injury.

Notice indicates a hazardous situation which, if not avoided, could result in property damage.
SIGNAL WORD
Type and source of risk!
Consequences arising from non-observance.
Risk prevention.
NOTICE
Type and source of damage!
Damage prevention.