System
Programming
HI 803 211 E Rev. 1.01.00
Page 69 of 110
6.1.3
System Variables and System Parameters
System variables
are pre-defined variables for processing properties or states of the HIQuad X
system in the user program. To define them, they are assigned global variables used in the user
program.
The system parameters are used to configure properties of the controller (only possible in
SILworX). System parameters that can only have the values TRUE and FALSE are also
referred to as switches.
System variables and system parameters are defined at different project levels. The system
variables and parameters are configured in SILworX, either in the Properties dialog box of the
corresponding structure tree node or in the detail view of the Hardware Editor.
Project level
Description of the system variables and parameters
Resource
See Table 24.
Hardware, in general
System variables for configuring the controller, see Table 24.
System variables providing information, see Table 26 and
Hardware: Modules
Refer to the manual of the corresponding module type.
The system variables and system parameters are configured in
the module's detail view of the Hardware Editor.
User Program
See Table 25.
Table 23: System Variables at Different Project Levels
Summary of Contents for HIQuad H41X
Page 1: ...Manual HIQuad X System Manual...
Page 109: ......