Hiltron HFW3100C, User Manual

Page: 257 / 307

24
Parameter Function
Resolution There are multiple resolutions. You can select from the
dropdown list.
For each resolution, the recommended bit stream value
is different.
Important
You can not set a resolution higher than 720P (not
including 720P) when the flip function is in process.
Frame Rate
PAL: 1
̚
25f/s
ˈ
NTSC: 1
̚
30f/s..
The frame rate may vary due to different resolutions.
Bit Rate Type
There are two options: VBR and CBR.
Please note, you can set video quality in VBR mode.
Reference Bit
Stream Reference bit rate value according to the resolution and
frame rate you have set.
Bit Rate
z
In VBR, the bit rate here is the max value. In CBR,
it is a fixed value.
z
See reference bit stream for recommended value.
I Frame Here you can set the P frame amount between two I
frames. The value ranges from 1 to 150. Default value
is 50.
Recommended value is frame rate *2.
Watermark
This function allows you to verify the video is tampered
or not.
Here you can select watermark bit stream, watermark
mode and watermark character. Default character is
DigitalCCTV. The max length is 85-digit. The character
can only include number, character and underline.
Sub
stream
Enable
Please check the box here to enable extra stream
function.
This function is enabled by default.
Bit stream type General bit stream.