7
Features
1
Dust extraction cover
2
Guard
3
Plunger
4
Saw blade
5
Guide roller
6
Blade release lever
7
Orbital action setting lever
8
Blower control lever
9
Sliding ON/OFF switch
10
Baseplate
11
Low-friction baseplate
WSJ 110-EB orbital action jig saw
EG declaration of conformity
Description:
orbital action jig saw
Serial no.:
000000000–999999999
Designation:
WSJ 110-EB
Year of design: 1998
We declare, under our sole responsibility, that this product complies with the following
standards or standardization documents:
EN 50144-1, EN 50144-2-10, EN 55014-1, EN 55014-2, EN 61000-3-2, EN 61000-3-3 and
according to the provisions of the directives 73/23/EEC, 89/336/EEC, 98/37/EC.
Hilti Aktiengesellschaft
Dr. Joachim Schneider,
Leiter BU-Wood
Dr. Andreas Dieterle,
Leiter F & E Wood
Power input:
650 W
Power output:
400 W
Stroke rate (no load):
500–3000 min.
-1
Stroke:
26 mm
Max. cutting depth in wood:
110 mm
Max. cutting depth in aluminium:
20 mm
Max. cutting depth in mild steel:
10 mm
Angular cutting (left / right):
0–45°
Number of orbital action settings:
4
Blade connection end:
T-shank
Extraction adapter exterior dia.:
30 mm
Weight of machine as per VDE 0740/T100:
2.3 kg
Protection class as per EN 50144
Z
/ II
Radio and TV interference suppression as per EN 55014
Technical data
12
Ventilation slots
13
Extraction system connector
14
Extraction hose
15
Anti-splinter insert
16
Baseplate locking screw
17
Stroke rate adjustment thumbwheel
The accompanying list of safety precautions
and the applicable regulations issued by your
trade association must be observed.
Noise/vibration information
Measured values determined according to EN 50144.
Typically, the A-weighted sound pressure level of the tool is less than 83 dB (A).
The noise level when working can exceed 85 dB (A). Wear ear protection.
The typical weighted acceleration is 2.5 m/s
2
.
Right of technical changes reserved
Warranty
Hilti warrants that the tool supplied is free of defects in material and workmanship. This
warranty is valid as long as the tool is operated and handled correctly, cleaned and serviced
properly and in accordance with the Hilti Operating Instructions, all warranty claims are made
within 12 months from the date of the sale (invoice date), and the technical system is
maintained. This means that only original Hilti consumables, components and spare parts may
be used in the tool.
This warranty provides the free-of-charge repair or replacement of defective parts only. Parts
requiring repair or replacement as a result of normal wear and tear are not covered by this
warranty.
Additional claims are excluded, unless stringent national rules prohibit such exclusion.
In particular, Hilti is not obligated for direct, indirect, incidental or consequential
damages, losses or expenses in connection with, or by reason of, the use of, or inability
to use the tool for any purpose. Implied warranties of merchantability or fitness for a
particular purpose are specifically excluded.
For repair or replacement, send tool and/or related parts immediately upon discovery of the
defect to the address of the local Hilti marketing organization provided.
This constitutes Hilti’s entire obligation with regard to warranty and supersedes all prior or
contemporaneous comments and oral or written agreements concerning warranties.
Printed: 07.07.2013 | Doc-Nr: PUB / 5071334 / 000 / 00
