Hilti DSW 1510-CA, Manual

Page: 39 / 48

*2238935*
2238935 English 35
11.Use a suitable screwdriver to tighten the screws (8 TX 45 screws) of the locating ring
to 25 Nm.
▶
The pulley is serviced and ready for installation.
10 Transport and storage
Transport
▶
Use the grips provided for transportation. Keep the grips clean and free from oil and
grease.
▶
Avoid lifting and carrying heavy loads. Use suitable lifting equipment and means of
transport and, when necessary, share the weight of heavy items between several
persons.
▶
Make sure that the equipment is held securely throughout all transport operations.
Secure the machine and its components to prevent movement or falling over during
transportation.
▶
Use only tested and approved lifting gear secured to the point provided for the
purpose to transport the device by crane. Before lifting, check that all removable parts
are secure, the drive unit is locked and the end stop installed. Never stand or pass
beneath a suspended load.
▶
After transporting, always check all visible parts and controls for signs of damage and
make sure that they all function correctly.
Storage
▶
Always store this product with the electric supply cable unplugged from the electricity
supply.
▶
Bear in mind that the machine could fall over. Stand the machine only on a solid, level
surface. Use the forward-facing pivoting pulleys to help steady the wire saw against a
suitable surface.
▶
Store this product in a dry place, where it cannot be accessed by children or
unauthorized persons.
▶
After a long period of storage, always check all visible parts and controls for signs of
damage and make sure that they all function correctly.
10.1 Transporting drive unit
WARNING
Risk of injury! Unsecured drive unit can cause damage during transport.
▶
If you are going to transport the drive unit on a trailer or a transporter, flip the wheels
up and secure the drive unit and the other components with ratchet straps.
Use suitable lifting equipment (e.g. fork-lift truck, crane) or a winch to load onto /
unload from the vehicle or trailer.
Use the ratchet strap supplied with the equipment to secure the wire storage pulleys
for transport.
For transport by crane, use the lifting eyes provided for the purpose.