![background image](http://html1.mh-extra.com/html/hilti/dsw-1510-ca/dsw-1510-ca_manual_2136363027.webp)
*2238935*
2238935
English
23
7.1.2 Setting up drive unit
WARNING
Risk of injury!
Risk of injury if the pulley stand falls!
▶
Use only anchors suitable for the base material to secure the pulley stands. Comply
with the instructions for use in the operating instructions of the anchor.
In principle, the
Hilti
HKD M16 metal expansion anchor is suitable for setting as
anchor in concrete to secure the equipment. An alternative method of attachment
might be necessary however, depending on circumstances.
ATTENTION!
The HKD M16 is not suitable for use in cracked concrete, masonry,
man-made or natural stone and similar materials.
Contact
Hilti
Technical Service if you have questions about secure fastening.
1. Transport the drive unit to the desired position. → page 35
2. Use the lifting bar to retract both wheels.
3. Adjust the feet (leveling) to level the drive unit so that it is firm and steady.
4. Secure the drive unit with anchors at the feet (anchoring), or with ratchet straps, so
that it cannot slip.
7.1.3 Drilling through-holes for wire guidance
When sawing through very thick objects, cut the part to be removed at slight angle
to form a taper. This will make the part easier to remove after it has been cut out.
1. Check the positions of the through-holes.
2. Use a rig-based diamond core drilling machine to drill the through-holes.
• When walls are thinner or permissible tolerances large, the through-holes can
also be drilled with a rotary hammer drill.
• Minimum hole diameter:
thickness (diamond wire) x 1.5
.
3. Round the corners of the edges of the drilled holes by using a suitable tool
7.1.4 Fastening a pulley stand
In principle,
Hilti
M16 metal expansion anchors are suitable for setting as anchors in
uncracked concrete to secure the equipment. An alternative method of attachment
might be necessary however, depending on circumstances. Contact
Hilti
Technical
Service if you have questions about secure fastening.
Summary of Contents for DSW 1510-CA
