Parts
No.
Designation
Saw blade
Centering and mounting flange
Saw blade flange
Mounting screw
Mounting holes for flush cutting
Assembly
Fitting the saw blade
-NOTE-
■
Use the DS FCA flush-cutting flange and flush-cutting
blade guard (available as accessories) for flush-cut-
ting applications.
■
Use only the original Hilti screw (10.9 grade steel) as
the central blade mounting screw.
■
Before operating the wall saw each time, always check
the mounting flange and saw blade for damage, cracks
or discoloration caused by overheating and clean the
saw blade if it has been oiled or greased.
1. Position the saw blade
on the saw arm, taking care
to observe the correct direction of rotation.
2. Fit the blade flange
and mounting screw. Tighten
the screw 4 only slightly.
3. Align the saw blade
so that the mounting holes for
flush cutting
lie between the water grooves.
4. Tighten the mounting screw
securely with the 19
mm box end wrench (110 Nm).
4.14
21
Printed: 08.07.2013 | Doc-Nr: PUB / 5069686 / 000 / 01