/
Extending the rail
-NOTE-
■
When long cuts are to be made, tapered connectors
and eccentric pins can be used to join individual rails
together to form a rigid unit.
1. Clean the tapered connector and connector sleeves.
2. Insert the tapered connector and secure it with an
eccentric pin.
3. Slide the rail onto the tapered connector and also
secure it with an eccentric pin.
4. To release the connection, turn the eccentric pins in
the opposite direction and push out the tapered con-
nector.
4.10
Parts
No.
Designation
Rail
Tapered connector
Eccentric pins
1
/
2
" square drive wrench
Tapered sleeve
Mounting the saw head
-NOTE-
■
The DS-FCA-110 flush-cutting flange should be mount-
ed on the saw head for flush-cutting applications.
1. Press the release button
on the locking lever
and push the locking lever downwards.
2. Position the saw head on the previously fastened rail.
3. Check that the guide rollers
are correctly aligned.
The center of the guiding surface
should be in line
with the middle of the guide roller.
4. Press the release button
and pull the locking lever
upwards.
5. Check the position of the guide rollers
(move the
levers several times) and check that the clamping lever
engages correctly before letting go of the saw head.
4.11
Assembly
Parts
No.
Designation
Clamping lever
Release button
Guide roller
Guiding surface
19
Printed: 08.07.2013 | Doc-Nr: PUB / 5069686 / 000 / 01