![background image](http://html1.mh-extra.com/html/hilti/ds-ts20-e-1-6/ds-ts20-e-1-6_operating-instructions-manual_2136338004.webp)
4
General information
Read the operating
instructions before use.
General warning
Warning:
electricity
4x
Removing cooling water from the saw head and power unit
1. Connect the blow-out adapter to the hose on the HIT pump.
2. Turn the bypass valve to the “closed” position and blow out the
saw head 7 times with the HIT pump.
3. Turn the bypass valve to the “open” position and blow out the
saw head 4 times with the HIT pump.
4. Blow out the power unit at the water outlet 4 times with the HIT
pump.
To avoid damage to the equipment,
water pressure must not exceed 6 bar.
358092
To avoid damage when temperatures below freez-
ing are expected, the cooling system must be ful-
ly drained by blowing out with the pump provided.
Please refer to the instructions provided in the tool-
box.
357860
max. 150kg
The saw head and accessory transport trolleys may be lifted by
crane only at the lifting points provided.
Before transport, all items of equipment must be secured to pre-
vent movement or falling.
Never loiter in the vicinity of loads suspended by cranes.
Use only tested and approved lifting gear.
! !
Handle with care!
320489
The power unit may be lifted by crane only at the lifting points
provided.
Never loiter in the vicinity of loads suspended by cranes.
Use only tested and approved lifting gear.
> 5°
357985
The transport trolley may become unstable or run away if stood on
an inclined surface.
Wear
protective gloves.
Wear ear
protection.
Wear
safety footwear.
Wear
respiratory
protection.
Wear
eye protection.
Wear
a hard hat.
1. General information
Safety notices and their meaning
DANGER
Draws attention to imminent danger that could lead to
serious bodily injury or fatality.
WARNING
Draws attention to a potentially dangerous situation that
could lead to serious personal injury or fatality.
CAUTION
Draws attention to a potentially dangerous situation that
could lead to slight personal injury or damage to the
equipment or other property.
NOTE
Draws attention to instructions and other useful infor-
mation.
Explanation of the pictograms and other
information
1.2
1.1
Symbols
Obligation signs
Warning signs
A
Amps
V
Volts
mm
Millimeters
Hz
Hertz
/min
Revolutions
per minute
n
Rated
no-load
speed
rpm
Revolutions
per minute
Printed: 09.03.2015 | Doc-Nr: PUB / 5139344 / 000 / 01