21
Setting up the wall saw system
Parts
No.
Designation
Power cable plug / socket
Control cable plug / socket
Cooling water hose connectors
Fitting the saw blade
NOTE
■
Use the DS FCA flush-cutting flange and flush-cutting blade guard (available as accessories) for flush-cutting
applications.
■
Use only the original Hilti screw (10.9 grade steel) as the central blade mounting screw.
■
Before operating the wall saw each time, always check the mounting flange and saw blade for damage, cracks or
discoloration caused by overheating and clean the saw blade if it has been oiled or greased.
1. Position the saw blade
on the saw arm, taking care to observe the correct direction of rotation.
2. Fit the blade flange
and mounting screw. Tighten the screw 4 only slightly.
3. Align the saw blade
so that the mounting holes for flush cutting
lie between the water grooves.
4. Tighten the mounting screw
securely with the 19 mm AF ring wrench (110 Nm).
7.8
Parts
No.
Designation
Saw blade
Centering and mounting flange
Saw blade flange
No.
Designation
Mounting screw
Mounting holes for flush cutting
No.
Designation
Protective cap
Securing sleeve
3
2
1
4
1
5
3
2
3
1
2
1
3
4
5
Printed: 09.03.2015 | Doc-Nr: PUB / 5139344 / 000 / 01
