![background image](http://html.mh-extra.com/html/hilti/ag-125-13s/ag-125-13s_original-operating-instructions_2135552018.webp)
***** Nur für internen Gebrauch ***** 27.03.2017 / 13:59:03 - H2\DOK-Sprachpaket\System\AG_125-13S-G5\DEU\AG125-13S_POS2
12
English
Total vibration (vector sum of three directions), measured in accordance with EN
60745-2-3
Other applications, such as cutting, may produce vibration values that deviate from the
given values.
AG 125-13S
Surface grinding with the
vibration-absorbing side handle
(a
h,AG
)
5.3 m/s²
Surface grinding with the hoop
handle (a
h,AG
)
6.3 m/s²
Sanding (a
h,DS
)
4.0 m/s²
Uncertainty (K)
1.5 m/s²
6 Before use
CAUTION
Risk of injury.
The accessory tool may be hot or have sharp edges.
▶
Wear protective gloves when fitting, removing or adjusting the accessory tool or
other parts and when troubleshooting.
6.1 Fitting the side handle
▶
Screw the side handle into one of the threaded bushings provided.
6.2 Guard
▶
Observe the instructions for fitting the applicable guard.
6.2.1 Fitting the guard
6
Note
The keying on the guard ensures that only a guard designed for use with the power
tool can be fitted. The keyed locating lug also prevents the guard from coming into
contact with the tool.
1. Fit the guard onto the drive spindle collar so that the two triangular marks on the guard
and on the power tool are in alignment.
2. Press the guard onto the drive spindle collar.
3. Press the guard release button and then rotate the guard until it engages in the desired
position.
◁
The guard release button jumps back.
6.2.2 Adjusting the guard
7
▶
Press the guard release button and then rotate the guard until it engages in the desired
position.
6.2.3 Removing the guard
1. Press the guard release button and then rotate the guard until the two triangular marks
on the guard and the power tool are in alignment.
2. Lift off the guard.