![background image](http://html.mh-extra.com/html/hilti/ag-125-13s/ag-125-13s_original-operating-instructions_2135552022.webp)
***** Nur für internen Gebrauch ***** 27.03.2017 / 13:59:03 - H2\DOK-Sprachpaket\System\AG_125-13S-G5\DEU\AG125-13S_POS2
16
English
2. Press the rear section of the on/off switch.
3. Slide the on/off switch forward.
4. Lock the on/off switch.
◁
The motor runs.
7.2.2 Switching off
▶
Press the rear section of the on/off switch.
◁
The on/off switch jumps into the off position and the motor stops.
8 Care and maintenance
Note
To help ensure safe and reliable operation, use only genuine Hilti spare parts and
consumables. Spare parts, consumables and accessories approved by Hilti for use
with the product can be found at your local
Hilti
Center or online at:
www.hilti.com
8.1 Care of the product
DANGER
Electric shock due to breakdown of protective insulation.
When working on
metal under extreme conditions, conductive dust may accumulate inside the power
tool, thereby adversely affecting the protective insulation.
▶
Use a stationary dust extraction system when working under extreme conditions.
▶
Clean the air vents frequently.
▶
Use a ground fault circuit interrupter (PRCD) in the electric power supply line to
the power tool.
WARNING
Electrical hazards.
Improper repairs to electrical parts may lead to serious injuries.
▶
Electrical parts may be repaired only by trained electrical specialists.
▶
Never operate the product when the air vents are blocked. Clean the air vents carefully
using a dry brush. Do not allow foreign objects to enter the interior of the product.
▶
Keep the product, especially its grip surfaces, clean and free from oil and grease. Do
not use cleaning agents containing silicone.
▶
Clean the outer surfaces of the tool with a slightly damp cloth at regular intervals. Do
not use a spray, steam pressure cleaning equipment or running water for cleaning.
Note
Frequent work on conductive materials (e.g. metal, carbon fiber) may make
shorter maintenance intervals necessary. Take your individual workplace risk
assessment into account.
8.2 Checks after care and maintenance work
▶
After carrying out care and maintenance, check that all protective and safety devices
are fitted and that they function faultlessly.
9 Transport and storage
▶
Do not transport the power tool with an accessory tool fitted to it.