![background image](http://html.mh-extra.com/html/hilti/ag-125-13s/ag-125-13s_original-operating-instructions_2135552017.webp)
***** Nur für internen Gebrauch ***** 27.03.2017 / 13:59:03 - H2\DOK-Sprachpaket\System\AG_125-13S-G5\DEU\AG125-13S_POS2
English
11
5 Technical data
5.1 Angle grinder
Note
When powered by a generator or transformer, the generator or transformer’s power
output must be at least twice the rated input power shown on the rating plate of the
power tool. The operating voltage of the transformer or generator must always be
5% and -15% of the rated voltage of the power tool.
The information given applies to a rated voltage of 230 V. The data may vary in the
event of deviations from the rated voltage and for country-specific versions. Please
refer to the power tool’s type identification plate for details of its voltage, frequency,
current and input power ratings.
AG 125-13S
Rated power input
1,300 W
Rated speed
11,500 /min
Maximum disc diameter
125 mm
Thread diameter
M14
Thread length
22 mm
Weight in accordance with EPTA
procedure 01/2003
2.5 kg
5.2 Noise information and vibration values determined in accordance with EN
60745
The sound pressure and vibration values given in these instructions have been measured
in accordance with a standardized test and may be used to compare one power tool with
another. They may be used for a preliminary assessment of exposure.
The data given represents the main applications of the power tool. However, if the
power tool is used for different applications, with different accessory tools or is poorly
maintained, the data may vary. This may significantly increase exposure over the total
working period.
An accurate estimation of exposure should also take into account the times when the
power tool is switched off, or when it is running but not actually being used for a job. This
may significantly reduce exposure over the total working period.
Identify additional safety measures to protect the operator from the effects of noise
and/or vibration, for example: Maintaining the power tool and accessory tools, keeping
the hands warm, organization of work patterns.
Noise emission values determined in accordance with EN 60745-2-3
AG 125-13S
Sound (power) level (L
WA
)
102 dB(A)
Emission sound pressure level
(L
pA
)
91 dB(A)
Uncertainty for the sound pres-
sure level (K
pA
)
3 dB(A)