Safety
15/90
2.4
Property damage
To avoid system damage and device destruction, you necessarily must
read, understand, and comply with the safety instructions and safety
messages in this manual before you install and operate your device.
2.4.1
Exceeding permissible supply voltage
To avoid destruction to your device due to high supply voltage, you must
observe the following instructions. These instructions apply to all devices
described in this manual.
The device may only be operated with the specified supply voltage. Make
sure that the limits of the permitted range for the supply voltage are not
exceeded. A supply voltage above the upper limit can cause serious
damage to the device! A supply voltage below the lower limit can lead to
malfunctions of the device. The permissible range for the supply voltage is
determined by the tolerances specified in this manual.
The data on the permissible supply voltage of the devices described
in this manual you find in the section Power supply and host
interface.
2.4.2
Exceeding permissible signaling voltage
To avoid destruction to your device due to high signaling voltage, you must
observe the following instructions. These instructions apply to all devices
described in this manual.
·
All I/O signal pins at the device tolerate only the specified signaling
voltage!
·
Operating the device with a signaling voltage other than the specified
signaling voltage may lead to severe damage to the device!
The data on the permissible signaling voltage of the devices
described in this manual you find in the section Power supply and
host interface.
netANALYZER device NANL-B500G-RE | Installation, operation and hardware description
DOC091110UM26EN | Revision 26 | English | 2019-07 | Released | Public
© Hilscher 2007-2019
