Hardware properties
72/90
8.2
Transparent Mode
The
Transparent Mode
is used with the data capturing to register any
Ethernet frame data, i. e., any bits transmitted including all frame data,
preamble and SFD (=Start of Frame Delimiter).
Note:
The usage of the Transparent Mode only makes sense with a 100
Mbit connection.
The figure below shows the basic principle of an Ethernet frame in the in
the
Ethernet Mode
or in the
Transparent Mode
.
Figure 25: Basic principle of an Ethernet frame in the Ethernet Mode or in the Transparent
Mode
As during the Ethernet Mode the preamble and the SFD (=Start of Frame
Delimiter) are not included to the frame, these parts are captured during
Transparent Mode.
Figure 26: Ethernet frame in Wireshark in the Ethernet Mode
Figure 27: Ethernet frame in Wireshark in the Transparent Mode
netANALYZER device NANL-B500G-RE | Installation, operation and hardware description
DOC091110UM26EN | Revision 26 | English | 2019-07 | Released | Public
© Hilscher 2007-2019
