Configuration
57/154
8.3.7.2
IP parameters
Ø
elect
Settings
in the left column of the netFIELD Wireless Web Server.
Ê
The Device configuration tab is displayed.
Figure 17: Device configuration tab (example)
The
Device configuration
tab allows you
·
to define how the module obtains its IP address (via the
Configuration
control
selection list, STATIC, BOOTP and DHCP options).
#
Option
Description
0
STATIC
The IP address of the module is configured statically.
This is done using the device IP address, subnet mask, and gateway IP
address entered in the
Device configuration
tab.
1
BOOTP
The device obtains its IP address via the BOOTP protocol.
2
DHCP
The device obtains its IP address via the DHCP protocol. This is the default
setting.
Table 34: Selection list „Configuration control“
·
If static configuration is used, set the IP address and subnet mask
manually (the gateway IP address is optional).
Parameter
Settings or Action
Device IP address
IP address for ETHERNET communication if static configuration of
IP address is used
Subnet mask
Subnet mask for ETHERNET communication with static
configuration of the IP address
Gateway IP address
Gateway IP address for ETHERNET communication with static
configuration of the IP address
Table 35: Device configuration tab- Parameter
NFD-3090-EIS-IOLM\W | Hardware, installation and commissioning
DOC200701UM02EN | Revision 2 | English | 2021-08 | Released | Public
© Hilscher 2020 - 2021
