hilscher 1912.112, User Manual

Page: 133 / 154

Technical data 133/154
12.3 Technical data protocol
Parameter Value
Connection 1 “Exclusive Owner – 8 ports x 32 bytes Input data: 276 bytes, Output data: 276 bytes
Connection 2 “Exclusive Owner – 8 ports x 32 bytes w/o
Config
Connection 3 “Listen Only – 8 ports x 32 bytes Input data: 276 bytes, output data: 0 bytes
Connection 4 “Input Only – 8 ports x 32 bytes
Connection 5 “Exclusive Owner - 16 ports x 16 bytes w/o
Config Input data: 292 bytes, Output data: 292 bytes
Connection 6 “Listen Only - 16 ports x 16 bytes Input data: 292 bytes, output data: 0 bytes
Connection 7 “Input Only - 16 ports x 16 bytes
Connection 8 “Exclusive Owner - 16 ports x 4 bytes w/o
Config Input data: 100 bytes, Output data: 100 bytes
Connection 9 “Listen Only - 16 ports x 4 bytes Input data: 100 bytes, output data: 0 bytes
Connection 10 “Input Only - 16 ports x 4 bytes
I/O connection types (implicit) Exclusive ownerOwner
Input Only
Listen Only
I/O connection trigger type Cyclic
Maximum number of I/O connections (class 1) 3
Maximum number of message connections (class 3) 6
Predefined standard objects Identity Object (0x01)
Message Router Object (0x02)
Assembly Object (0x04)
Connection Manager (0x06)
Event Log Object (0x41)
DLR Object (0x47)
QoS Object (0x48)
TCP/IP Interface Object (0xF5)
Ethernet Link Object (0xF6)
DHCP Supported (factory setting)
BOOTP Supported
Fixed IP address Supported
Duplex mode Half duplex, full duplex, auto-negotiation
MDI mode MDI, MDI-X, Auto-MDIX
ACD (Address Conflict Detection) Supported
Integrated switch Supported
Reset services CIP reset services: Identity Object, Reset Services Type 0
and 1
Data transport layer Ethernet II, IEEE 802.3
Interface type 10BASE-T, 100BASE-TX, isolated
Table 98: Technical data EtherNet/IP Adapter
NFD-3090-EIS-IOLM\W | Hardware, installation and commissioning
DOC200701UM02EN | Revision 2 | English | 2021-08 | Released | Public © Hilscher 2020 - 2021