Hillstone A200 Series, Hardware Reference Manual

Page: 11 / 27

11
Table: SFP Port Attributes
Attribute Description
Connector SFP
Frame Format Ethernet_II
Ethernet_SNAP
Negotiation
Mode SFP optical module 1000Mbps
SFP copper module
10/100/1000Mbps autosensing
(some only supports 1000Mbps)
Full/half-duplex
The SFP port supports the following two types of modules:
 SFP optical module
 SFP copper module
If an SFP optical module is applied to an SFP port, you should use a cable with a LC-type optical
connector. The A200-Series device supports five types of 1000Base-FX SFP optical modules. All
optical modules are hot-swappable.
Table: SFP Optical Module Attributes
Attribute Description
Short-haul
Multimode
Optical
Module
(850nm)
Medium-
haul Single-
mode
Optical
Module
(1310nm)
Long-haul
single-mode
optical
module
(1310nm)
Medium-haul
Single-mode
Optical
Module
(1310nm)
Long-haul
Single-mode
Optical
Module
(1310nm)
Long-haul
Single-mode
Optical
Module
(1550nm)
Ultra-long-
haul Single-
mode Optical
Module
(1550nm)
Connecto
r
LC
Fiber
Type
62.5/m
multi-
mode
fiber
9/m
single-
mode fiber
9/m
single-
mode fiber
9/m
single-
mode fiber
9/125mm
single-mode
fiber
9/m
single-
mode fiber
9/m
single-
mode fiber
9/125mm
single-mode
fiber
Maximu
m
Transmis
sion
Distance
0.3km 80km