Hillstone A200 Series, Hardware Reference Manual

Page: 10 / 27

10
Attribute Description
Port Standard RS-232C
Baud Rate 115200 bit/s
Services Connect the CON port to the serial port of a PC and
run a terminal emulation program on the PC to
configure the device
Transmission Medium Console cable
USB Port
The A200-Series device provides up to 1 USB 2.0 host ports. Attributes for the USB host ports are
shown in the table below:
Table: USB 2.0 Host Port Attributes
Attribute Description
Connector USB Type-A interface
Port Standard USB 2.0 host interface
Negotiation Mode 1.1/2.0 autosensing
Gigabit Ethernet Port
The A200-Series device provides several fixed gigabit Ethernet ports. Attributes for the gigabit
Ethernet ports are shown in the table below:
Table: Gigabit Ethernet Port Attributes
Attribute Description
Connector RJ-45
Port Standard Auto-MDI/MDIX (crossover cable and straight-through cable
autosensing)
Frame Format Ethernet_II
Ethernet_SNAP
Negotiation
Mode 10/100/1000Mbps autosensing
Full/half-duplex
SFP Port
The A200-Series device provides several SFP ports. Attributes for the SFP ports are shown in the table
below: