© Hills Industries 2006
Page 40
Feature 36
new
Days of the Week for Auto Arming in Areas 1 - 8
Feature 36 selects which days of the week each area will auto arm. Segment 1 is for area 1, and Segment 8 is for area 8.
Requires Features 33, 34 and 35 to be programmed to determine the Open Window. If a zone is faulted when the panel
tries to auto arm, the zone will be bypassed.
Option 8 relates to a retry timer. If auto arm is enabled, the panel will auto arm the selected area at the Closing Time on the
selected day. Note that there may be a few minutes of delay depending on the site and programming. If there are zones
faulted then the panel will wait until there is
45 continuous minutes
of no activity (i.e. Ready status) and attempt to auto
arm. A user can delay the auto-arm by entering their code, the panel will wait for 45 minutes of no activity before trying to
auto arm again. The retry timer is not adjustable. Enable option 8 to disable the retry timer.
User 97 is reported for auto arm.
A user can stop/delay the auto arm by entering their code, no event log is recorded for the user code entered.
Segments 1-8
Areas 1 – 8
1
Auto Arming on Sunday
2
Auto Arming on Monday
3
Auto Arming on Tuesday
4
Auto Arming on Wednesday
5
Auto Arming on Thursday
6
Auto Arming on Friday
7
Auto Arming on Saturday
8
new
Disable Retry Timer
Feature 37
new
Area 1 – Account Code
Segments 1-6
10
10
10
10
Reserved
new
Reserved
new
Feature 37 contains the account code sent when area 1 is reported. If Feature 37 is left as default (all ‘10’s), then the
system account code (Feature 5) will be used.
Only available on Reliance 12 and Reliance 128.
Areas 2 – 8 Programming Options
Feature 38
new
Area 2 – Account Code
Segments 1-6
10
10
10
10
Reserved
new
Reserved
new
Feature 38 contains the account code sent when area 2 is reported. If Feature 38 is left as default (all ‘10’s), then the
system account code (Feature 5) will be used.
