© Hills Industries 2006
Page 26
Download Options (Features 12 – 15)
Feature 12
Download Access Code
Segments 1-8
1
6
0
0
0
0
0
0
Feature 12 contains the eight digit access code the panel must receive from the downloading software before the panel will
permit downloading to occur.
Feature 13
Number of Rings (Seg 1) / Number of Calls to Answer (Seg 2)
Segments 1-2
0
0
Feature 13, segment 1 contains the number of rings the panel must detect before answering the telephone line when
initiating a download session. A value of 1 to 15 can be entered in this segment. Segment 2 contains the number of calls
the panel must detect before accepting the number of rings in segment 1. A value of 1 to 15 can be entered in this segment.
A call is satisfied by one (1) or more rings, and then an eight (8) second period of no ringing. The next call must then be
made within 45 seconds. The total number of calls must be reached before the panel will count for the number of rings (in
segment 1) during the necessary subsequent call. A value of “0” = disabled.
Feature 14
Download Control
Feature 14 contains the option selections for the controlling of download sessions. The following options can be
enabled or
disabled using this feature.
Segment 1
1
On enables two call Answering Machine Defeat (see page 28 for a full explanation of this option).
2
Reserved
3
On enables Call Back Before Download Session (see Feature 15).
4
On enables Control Panel Shutdown
(Can only be viewed from the code pad, must be changed through downloading).
5
On locks all local programming
(Can only be viewed from the code pad, must be changed through downloading).
6
On locks programming of all features associated with the communicator
(Can only be viewed from the code pad, must be changed through downloading).
7
On locks out download section. (If ‘On’, Features 12-15 cannot be viewed from the code pad)
Note: This segment can only be changed through the download software.
8
On enables Call Back at Auto Test Interval to perform download software automatic functions
(Refer to your download software help for a full explanation of this option).
Feature 15
Call Back Number
Segments 1-20
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
If a telephone number is programmed into this feature, and “Call Back Before Download Session” is enabled in Feature 14,
the control panel will hang up for approximately 10 seconds and then call back. If pulse dialling is desired, program a ‘15’ in
the segment where pulse dialling should begin. If the entire number should be pulse dialling, program a ‘15’ in the first
segment. Four-second delays can be obtained anywhere in the sequence by programming a ‘13’ in the appropriate delay
feature.
Warning: the call back phone number should always be reviewed for accuracy before disconnecting!
