Hills NVC-BM1 User Manual Download

Page: 98 / 107

Figure 9-12

Reboot the Device

9.7.2

Restoring Default Settings

Steps:

Enter the Maintenance interface:

Configuration > Basic Configuration> System > Maintenance

Configuration > Advanced Configuration> System > Maintenance

Click

Restore

Default

to restore the default settings.

Figure 9-13

Restore Default Settings

Note:

After restoring the default settings, the IP address is also restored to

the default IP address, please be careful for this action.

9.7.3

Exporting / Importing Configuration File

Purpose:

Configuration file is used for the batch configuration of the camera, which can

simplify the configuration steps when there are a lot of cameras needing configuring.

Steps:

Enter the Maintenance interface: Configuration > Basic Configuration> System >

Maintenance, or Configuration>Advanced Configuration> System > Maintenance

Click

Export

to export the current configuration file, and save it to the certain

place.

Click

Browse

to select the saved configuration file and then click

Import

to start

importing configuration file.

Note

: You need to reboot the camera after importing configuration file.

Summary of Contents for NVC-BM1












































































































Search results

Summary of Contents for NVC-BM1

Reviews:

Related manuals for NVC-BM1

Brands by name

Popular brands

Hills NVC-BM1, User Manual

Search results

Summary of Contents for NVC-BM1

Reviews:

Related manuals for NVC-BM1

Brands by name

Popular brands