Hills NVC-BM1 User Manual Download

Page: 101 / 107

100

Appendix

Appendix 1 HVS Discovery Tool Software

Introduction



Description of HVS Discovery Tool Software

HVS Discovery Tool software is a kind of user-friendly and installation-free online

device search tool. It searches the active online devices within your subnet and

displays the information of the devices. You can also modify the basic network

information of the devices using this software.



Search active devices online



Search online devices automatically

After launch the software, it automatically searches the online devices every

15 seconds from the subnet where your computer locates. It displays the total

number and information of the searched devices in the Online Devices

interface. Device information including the device type, IP address, port

number, gateway, etc. will be displayed.

Figure A.1.1 Search Online Devices

Note:

Devices can be searched and displayed in the list in 15 seconds after they go

online; they will be removed from the list in 45 seconds after they go offline.

Summary of Contents for NVC-BM1












































































































Search results

Summary of Contents for NVC-BM1

Reviews:

Related manuals for NVC-BM1

Brands by name

Popular brands

Hills NVC-BM1, User Manual

Search results

Summary of Contents for NVC-BM1

Reviews:

Related manuals for NVC-BM1

Brands by name

Popular brands