Hills NVC-BM1 User Manual Download Page 52

Page: 52 / 107

Check the checkbox in front of textbox to enable the on-screen display.

Input the characters in the textbox.

(Optional)Use the mouse to click and drag the red text frame

in the live

view window to adjust the text overlay position.

Click

Save

Note:

Up to 8 text overlays are configurable.

5.5.4

Configuring Privacy Mask

Purpose:

Privacy mask enables you to cover certain areas on the live video to prevent certain

spots in the surveillance area from being live viewed and recorded.

Steps:

Enter the Privacy Mask Settings interface:

Configuration > Advanced Configuration> Image > Privacy Mask

Check the checkbox of

Enable Privacy Mask

to enable this function.

Click

Draw Area

Figure 5-35

Privacy Mask Settings

Click and drag the mouse in the live video window to draw the mask area.

Note:

You are allowed to draw up to 4 areas on the same image.

Summary of Contents for NVC-BM1












































































































Search results

Summary of Contents for NVC-BM1

Reviews:

Related manuals for NVC-BM1

Brands by name

Popular brands

Hills NVC-BM1, User Manual

Search results

Summary of Contents for NVC-BM1

Reviews:

Related manuals for NVC-BM1

Brands by name

Popular brands