Hills NVC-BM1, User Manual

Page: 64 / 107

63
Steps:
1. Enter the Exception Settings interface:
Configuration > Advanced Configuration> Events > Exception
2. Check the checkbox to set the actions taken for the Exception alarm. Refer to
Task 3 Set the Alarm Actions Taken for Motion Detection in Section 6.6.1.
Figure 5-47 Exception Settings
3. Click Save to save the settings.
5.6.6 Traversing Virtual Plane
This function can be used for detecting people, vehicles and objects traversing a
pre-defined virtual plane. The traversing direction can be set as bidirectional, from left
to right or from right to left. And a series of linkage method will be triggered if any
object is detected.
Steps:
1. Check the Enable Traversing Virtual Plane Detection checkbox.
2. Click the Draw Area , and a virtual plane will show on the image.
3. Click on the line, and you will see two red squares on each end, drag one of
the red squares to define the arming area.