manualshive.com logo in svg

Hillrom Welch Allyn Connex ProBP 3400, Service Manual, Page: 4 / 64

Share
Download
Hillrom Welch Allyn Connex ProBP 3400 Service Manual Download Page 4

Upgrades and licenses ........................................................................................................... 47

Available upgrades and licenses ............................................................................................................................. 47

Field-replaceable units .......................................................................................................... 49

External housing ................................................................................................................................................................ 49
Chassis and manifold assemblies ............................................................................................................................ 50
Circuit board assembly .................................................................................................................................................. 52
Miscellaneous parts ......................................................................................................................................................... 53
Service tool ............................................................................................................................................................................ 53
Licenses ................................................................................................................................................................................... 53
Partners in Care service and support agreements ....................................................................................... 53
Service and repair training .......................................................................................................................................... 54

Appendices ................................................................................................................................ 55

Clean the device ................................................................................................................................................................ 55
Factory defaults .................................................................................................................................................................. 56
Disassembly and repair reference .......................................................................................................................... 56

iv  Contents

Welch Allyn® Connex® ProBP™ 3400 digital blood pressure device

Summary of Contents for Welch Allyn Connex ProBP 3400

































































Reviews:

No comments