Hillrom Vest 105, Instructions For Use Manual

Page: 27 / 94

The Vest® Airway Clearance System, Model 105 19
Instructions for Use (145330 REV 18)
Instructions for Use
S
ETTING
U
P THE
U
NIT
Inspect the Air Pulse Generator and Garments before each use. In
addition, after each cleaning cycle, visually inspect each component for
any wear, tear, or deformity. If you have any concern about a component,
do not use it, and replace that component before the next therapy
session. Failure to do so could cause injury.
NOTE:
If your physician has prescribed aerosol therapy to be used during the
treatment, set up the appropriate equipment.
WARNING:
Warning —If the Air Pulse Generator is wet or damp, do not plug it into a
power source or use it. Patient injury, personal injury, or equipment
damage could occur.
1. Make sure the Air Pulse Generator is not wet or damp.
2. Put the Air Pulse Generator in a
location that is stable and
convenient.
3. Plug the Power Cord into the back
of the Air Pulse Generator.
4. Plug the Power Cord into an
applicable power outlet.
NOTE:
The Power Cord required for your
country may be different than shown.