Hill-Rom CarePorter P3000, Service Manual

Page: 179 / 220

Preventive Maintenance
Chapter 6: General Procedures
Page 6 - 8 CarePorter™ Cart Service Manual (man239)
Gas spring Ensure the gas spring pushes the rear legs into the locking posi-
tion as the CarePorter™ Cart is moved forward. When the gas
spring is fully extended, check the gas spring rod for scratches,
nicks, or dents. Replace if necessary (refer to procedure 4.12).
Manifold alarms Check the manifold alarms and gas display LEDs for proper func-
tion and illumination. Replace the gas display board if necessary
(refer to procedure 4.11).
TPM alarms Check the TPM alarms and TPM display LEDs for proper func-
tion and illumination. Replace the TPM display board if necessary
(refer to procedure 4.10).
Battery cable Inspect the battery cable from the TPM to the battery pack for
cuts, nicks, excessive abrasion or breaks. Replace if necessary
(refer to procedure 4.3).
Push bar Make sure the push bar is securely attached.
Side push handle Inspect the side push handle covers for cuts, nicks, excessive
abrasion or breaks. Replace if necessary (refer to procedure 4.20).
Accessories Check all accessories for proper fit and function.
Overall appearance Touch up paint where necessary.
Inspect all labels and replace if necessary.
Check the general aesthetics of the CarePorter™ Cart.
Function Procedure