Service Manual LikoGuard™
overhead lift
• 3EN190401 Rev. 7
6
www.hillrom.com
2.1 General Troubleshooting
The lift doesn’t work
A repeated signal can be heard from the lift
The lift stops in the high position
In the event of excessive noise from the lift!
1. Check that the Emergency Stop button is not
activated. (a signal will be heard if the emergency stop
is activated and the hand control buttons are pressed)
2. Charge the LikoGuard™ Overhead lift.
3. If the lift still does not work satisfactorily, please
contact Hill-Rom.
1. Charge the LikoGuard™ Overhead lift immediately.
2. If the lift still does not work satisfactorily, please
contact Hill-Rom.
Please contact Hill-Rom.
The lift does not achieve maximum lifting capacity
1. Charge the LikoGuard™ Overhead lift.
2. If the lift still does not work satisfactorily, please
contact Hill-Rom.
1. Check that the Emergency Stop button is not
activated.
2. Use the mechanical or the electrical emergency
lowering device to lower the patient onto a firm
surface.
3. Charge the LikoGuard™ Overhead lift.
4. If the lift still does not work satisfactorily, please
contact Hill-Rom.
