Hilberling PT-8000, Operating Manual

Page: 9 / 82

PT-8000 A·B·C User Manual
A–3
1.4 Technical Specifications
RX: Double Super Heterodyne 1st IF 70.7MHz and 2nd IF 10.7MHz
Range 9 kHz ... 54 MHz / 110 ... 170 MHz (MAIN / SUB)
Xtal-Filter 1st and 2nd IF (BW) 70.7 MHz (2.7 kHz / 6.0 kHz / 12.0 kHz) MAIN 10.698 / SUB 10.702 MHz (0.5 ... 6.0 kHz / 12.0 kHz)
Sensitivity @ 10 dB S+N/N AM FM SSB ISB CW
200 kHz ... 1.8 MHz 6 kHz / 2 µV 12 kHz / 0.5 µV 2.4 kHz / 1 µV 3.1 kHz / 0.5 µV 0.5 kHz / 0.5 µV
1.8 MHz … 54 MHz 6 kHz /1.2 µV 12 kHz / 0.25 µV 2.4 kHz / 0.22 µV 3.1 kHz / 0.4 µV 0.6 kHz / 0.15 µV
110 MHz ...170 MHz 6 kHz / 1.0 µV 12 kHz / 0.22 µV 2.4 kHz / 0.22 µV 3.1 kHz / 0.22 µV 0.6 kHz / 0.18 µV
IP3 @ 20 kHz 0.5 MHz ... 170 MHz +39 dBm
IMD DR3 @ Spacing @ 2 kHz 86 dB; @ 5 kHz 97 dB; @ 10 kHz 104 dB; @ 20 kHz 108 dB; @ 100 kHz 113 dB;
Image Rejection And Spurious Signal Suppression >>70 dB
Digital Signal Processing (DSP)
Variable bandwidth for 2nd IF 10.7 MHz Xtal filters; multiple automatic audio notch filtering;
Almost undistorted audio when engaging automatic noise reduction through enhanced algorithms
AF-Output 4.8 Watt (2 x 2.4 Watt MAIN / SUB); additional speaker in HN-8000 and optional alternate speaker
TX: Independent Transmission Of 2 Sidebands – ISB
Range 1.8 MHz … 54 MHz; 144 MHz … 148 MHz (160, 80, 60, 40, 30, 20, 17, 15, 12, 10, 6, 2 m-Band)
Mode /Output (max.-HF; 6m) AM / AME / ISB / FM SSB/CW IMD3 (PEP) IMD3 (Class A)
PT-8000 A 100 Watt 100 Watt -40 dB 2.5 Watt / -50 dB
PT-8000 B 125 Watt 600 Watt -36 dB 2.5 Watt / -50 dB
PT-8000 C 2.5 Watt 10 Watt -36 dB 2.5 Watt / -50 dB
VHF PT-8000 A / B / C 25 Watt 25 Watt -36 dB 2.5 Watt / -50 dB
Carrier Suppression SSB / ISB – 70 dB / PEP
Opposite Sideband Suppression SSB / ISB – 70 dB / @1 kHz
FM Frequency deviation ± 3 kHz FMN; repeater operations with variable shift 0 ... 2 MHz
General
Memory Channels Organized in 3 banks @ 99 channels; automatic scanning mode
Frequency Stability 0.05 ppm from 10C° to 60 C°; Reference Clock 20 MHz adjustable in 12 mHz steps; Ext. Clock 10 MHz
Environmental Conditions Temperatures 10C° to 60C° Avoid high humidity (operating below dew point) and dusty operating
conditions
Antenna Connectors N-type 2 x HF 50 Ohm; 1 x VHF 50 Ohm
Dimensions (H x B x T) approximately 175 mm x 425 mm (543 mm including handles) x 465 mm
Weight approximately. 52 lbs
HN-8000 Switching Power Supply for PT-8000A/B/C
Mains
Power Requirement 90 … 260 VAC Power Factor Correction (PFC)
117 VAC / 13 Amp.; 240 VAC / 7 Amp.
PT-8000A DC 13.8 V / 10 Amp. , 50 V / 10 Amp.
PT-8000B DC 13.8 V / 10 Amp., 100 V / 12 Amp.
Dimensions approximately 175 mm x 225 mm x 440 mm
Weight approximately 15 lbs
Accessories
All Versions Cable set (AC, DC, Ground, Speaker)
Ham Version - Desk Microphone T9 600 Ohm @ 1kHz, dynamic, RFI-proof, kidney-shaped acoustic response
- set of plugs
Specification Professional Version
TX-range according to customers specification; extended temperature range; UL-listed and more.
For additional information and special requirements please contact Hilberling GmbH
Table 1