Hilberling PT-8000, Operating Manual

Page: 47 / 82

PT-8000 A·B·C User Manual
C–37
After selecting the memory bank (#1 … #3) the control MEM/CH / STEP-VFO
gives access to the 99 stored frequencies.
Both MAIN- and SUB-RX can read and write into the memory
Channels which are selected for SCAN operation are marked by an asterisk
(*). If the frequency of the marked channel lies within the SCAN boundaries it
will be used for SCAN operations.
Pushing CHANNEL again will terminate the CHANNEL operation:
•
the last used VFO frequency will be activated
•
the channel menu will be called up again in case
a different soft key menu was activated during
channel operations
•
otherwise the channel soft key menu will be left
and the last used soft key menu will be called up
•
the CHANNEL LED will be off
CHANNEL
information display
Termination of
CHANNEL Operation
Bank #
Channel # Mode Bandwidth
Stored Frequency
SCAN identifier
Picture 42