Hilberling PT-8000, Operating Manual

Page: 53 / 82

PT-8000 A·B·C User Manual
C–43
RIT/XIT menu / RIT/XIT offset
Tune MAIN-RX to the desired transmit frequency to call a station that works
split. Engage RIT and tune RIT to receive the station you want to call.
The offsets for XIT/RIT are limited to 9.999kHz.
11.8 RIT / XIT
RIT
(Receiver Incremental Tuning) allows to shift/adjust the receiving
frequency plus/minus 9.999 kHz from the transmit frequency. The MAIN-RX
and the transmitter are no longer „transceive“. RIT is only possible with the
MAIN-RX.
XIT
(Transmitter Incremental Tuning) allows to shift/adjust the transmitting
frequency plus/minus 9.999 kHz from the receiving frequency. The MAIN-RX
and the transmitter are no longer „transceive“. RIT is available with the MAIN-
RX only.
The tuning range of RIT/XIT is always plus/minus 9.999 kHz
When pushing RIT/XIT located in the cluster VFO:
•
RIT/XIT-LED will be on
•
The RIT/XIT softkey menu will be called up - RIT
or XIT are displayed inverse to show status
•
CLAR control is enabled
•
RIT or XIT and the offset is displayed right next
to the frequency
In case of RIT only the display will show the actual frequency resulting from
the RIT offset. During XIT always the receiving frequency will be displayed.
The status RIT or XIT will be shown in the display together with the offset
adjusted.
Activate RIT (shown)
Activate XIT
Clear the offset to 0
Only for RIT: resulting
RX frequency
Offset RIT and XIT RIT or XIT
Pi t 51
Pi t 52