Hilberling PT-8000, Operating Manual

Page: 56 / 82

C–46
Part C Installation And Operation
Display Information
Pushing softkey BANK 1, BANK 2 and BANK 3 gives access to other banks.
Use MEM/CH to select desired memory/channel. Pushing softkeys VFO >
MEM“ will write the VFO frequency to the selected memory.
Always the last used bank # is selected and displayed with its first empty
memory
In case all memories are written the last used memory will be displayed and
overwritten.
•
The frequency display of the standby VFO will
be substituted by the information shown below:
Memories are accessible from both MAIN- and SUB-RX.
When attempting to overwrite memories there will be no warning.
If the MEM softkey menu is displayed pushing MEM will terminate this modus.
If the menu is not displayed pushing MEM will call it up and a second push
will terminate MEM operation. MEM-LED will turn off.
Bank # Memory # Mode Bandwidth Stored Frequency SCAN Marker
Pi t 57
Termination of
MEM modus