HIKVISION UD01394B, User Manual

Page: 18 / 220

Digital Video Recorder User Manual
17
No. Name Function Description
Plays or pauses the playing of video files in Playback mode.
Advances the video by a single frame in single-frame Playback mode.
Stops/starts auto switch in Auto-switch mode.
5 POWER Power on/off switch.
6 JOG SHUTTLE Control
Moves the active selection up and down in a menu.
Cycles through different channels in live view mode.
Jumps 30s forward/backward in video files in the playback mode.
Controls the movement of the PTZ camera in PTZ control mode.
Moves the active selection up and down in a menu.
7 USB Interface
Universal Serial Bus (USB) ports for additional devices such as USB
mouse and USB Hard Disk Drive (HDD).
8 IR Receiver Receiver for IR remote control.
Front Panel 4:
Figure 1. 5 Front Panel of DS-8100HQHI-F/N
Table 1. 5 Description of Front Panel
No. Name Function Description
1
Status
Indicators
ALARM
Turns red when a sensor alarm is detected.
READY
Turns green, indicating that the DVR is functioning properly.
STATUS
Turns blue when device is controlled by an IR remote.
Turns red when controlled by a keyboard and purple when IR remote
and keyboard is used at the same time.
HDD Flickers in red when data is being read from or written to HDD.
Tx/Rx Flickers in green when network connection is functioning properly.
GUARD
Turns blue when the device is in armed status; at this time, an alarm
is enabled when an event is detected.
Turns off when the device is unarmed. The arm/disarm status can be
changed by pressing and holding on the ESC button for more than 3
seconds in live view mode.
2 Alphanumeric Buttons
Switches to the corresponding channel in live view or PTZ control
mode.
Inputs numbers and characters in edit mode.
Switches between different channels in playback mode.
Turns blue when the corresponding channel is recording; turns red
when the channel is in network transmission status; turns pink when
the channel is recording and transmitting.