HIKVISION Mini Analog Speed Dome, User Manual, Page: 9 / 42

User Manual of Mini Analog Speed Dome
© Hikvision . All Rights Reserved.
8
Chapter 2 Getting Started
2.1 Power-up Action
After the power is connected, the speed dome will perform a series of self-test actions. It performs
lens actions firstly, then the panning movement and the tilting movement at last. After the
power-up self-test actions, the system information will be displayed for 2 minutes on the live view
screen as shown below.
TYPE DS- 2XXXX-X
SN 000000000
ADDRESS 0
COM FORMAT 2400,8,1
PROTOCOL AUTO
FIRMWARE 0. 00
HARDWARE 0. 00
BUILD DATE 13 11 16
Figure 2-1 System Information
Table 2-1 Descriptions of the System Information
System Info Description
TYPE The model of the speed dome.
SN The serial number of the speed dome.
ADDRESS The default communication address of the speed dome.
COM Format
The communication settings of the speed dome, including baudrate
(2400 by default), data bit (8 by default) and stop bit (1 by default)
digit).
PROTOCOL It is for the communication with other devices.
VERSION
The version of the firmware.
HARDVERSION
The version of the hardware.
BUILD DATE
The date when the program of the software is compiled.
Notes:

You have to configure the address and the baudrate for the speed dome the same as those in
the control devices.

The speed dome is self-adaptive to the PELCO-D, PELCO-P, PRIVATE-Code, VICON, and
KALATEL-312 protocols.