HIKVISION Mini Analog Speed Dome, User Manual, Page: 29 / 42

User Manual of Mini Analog Speed Dome
© Hikvision . All Rights Reserved.
28
Note: Up to 4 patterns can be configured.
3. Edit the pattern.
Steps:
(1) Move the cursor to EDIT PATTERN and click IRIS+ to enter edit mode.
REMAIN MEMORY 100
DONE: OPEN
QUIT: CLOSE
Figure 3-16 Edit the Pattern
(2) Click the PTZ control buttons and direction buttons to operate the speed dome to draw a
movement path, including pan scan, tilt scan, zoom in, zoom out, etc. The speed dome can
automatically memorize the path you operated as a pattern.
(3) Click IRIS+ again to save the pattern and exit edit mode.
Notes:

REMAIN MEMORY indicates the remaining memory of the speed dome for configuring the
patterns. When it reaches 0, no more patterns can be configured. You can also see the
remaining memory shown under
PATTERNS menu as REMAINING .

The pan/tilt movements and the lens operations cannot be memorized simultaneously.
4. Preview the pattern.
Enter the
PREVIEW menu to preview the current pattern.
5. Call the defined pattern.
You can call the special presets to call the defined pattern. E.g. call preset 41 to call pattern 1.
Please refer to
Section 2.3 to find the corresponding preset number for each pattern.
6. Delete the patterns.
To Delete a Chosen Pattern:
Click
IRIS+ to enter EIDT PATTERN and you can see DEL PATH ABOVE . Click IRIS+ to delete the
pattern.
Note: If you delete the current pattern, the following pattern will also be deleted. E.g., if pattern
2 is deleted, pattern 3 and pattern 4 will be deleted as well.
To
Clear All the Patterns:
Enter CLEAR PATTERN menu and click IRIS+ to delete all the defined patterns.
3.4.5 Configuring Time Tasks
Purpose:
A time task is a preconfigured action that can be performed automatically at a specific date and
time.