User Manual of Mini Analog Speed Dome
© Hikvision . All Rights Reserved.
27
up to 32 presets in sequence for a patrol. Press
IRIS+
to save the new settings or press
IRIS-
to cancel and return to the previous menu.
Preview the patrol.
Move the cursor to
PREVIEW
and click
IRIS+
to preview the current patrol. You can click
IRS+
again to stop the preview.
Call the defined patrol.
You can call the special presets to call the defined patrol. E.g. call preset 35 to call patrol 1.
Please refer to
Section 2.3
to find the corresponding preset number for each patrol.
Delete a patrol.
You can move the cursor to
CLEAR PATH
and click
IRIS+
to delete the current patrol.
Configuring the shortcut patrol.
Calling the system-defined preset 46 can enable the shortcut patrol. The patrol starts from the
number 1 preset to number 32 preset by default.
You can set the duration time in a preset scene by adjusting
PATROL-D
. The value can be 5, 10,
20, 30 and 60s.
3.4.4
Configuring Patterns
Purpose:
A pattern is a memorized, repeatable series of pan, tilt, zoom and preset movements that can be
recalled by a command or automatically performed by a configured function (park, time task, and
power-up).
Steps:
1.
Move the cursor to enter the
PATTERNS
submenu:
MAIN MENU > DOME SETTINGS > PATTERNS
PATTERNS
PATTERN NUM 1
EDIT PATTERN
PREVIEW
CLEAR PATTERN
REMAINING 100
BACK EXIT
Figure 3-15
Pattern Configuration Menu
2.
Choose the pattern number.
Steps:
(1)
Move the cursor to
PATTERN NUM
and click
IRIS+
to enter edit mode.
(2)
Click the up/down direction buttons to select the number of the pattern which is to be
configured.
(3)
Click
IRIS+
again to confirm the settings.
Summary of Contents for Mini Analog Speed Dome
Page 1: ...Mini Analog Speed Dome User Manual UD 6L0201D1200A01...
Page 42: ......