User Manual of Mini Analog Speed Dome
© Hikvision . All Rights Reserved.
30
(4)
Click
IRIS+
to confirm the settings and exit.
Note:
The weekday can be set to be from
Monday
to
Sunday
or
Whole Week
; the
H
refers to
Hour and the
M
refers to Minute.
WEEK WHOLE WEEK
START(H-M) 00 00
END(H-M) 00 00
DONE: OPEN
QUIT: CLOSE
Figure 3-18
Set the Task Time
6.
Delete the task.
Move the cursor to
TASK CLEAR
, click
IRIS+
to delete the time and action of the current task,
and click
IRIS+
again to confirm the settings and exit.
3.4.6
Configuring Zone
Purpose:
A zone is a panning and tilting area defined by the left/right and up/down limit stops. You can
configure the zones on
ZONES
submenu. You can define a zone when the targeted surveillance
scene is limited.
Steps:
1.
Move the cursor to enter the zone configuration submenu:
MAIN MENU > DOME SETTINGS > ZONES
ZONES
ZONE NUM 1
UNDEFINED
EDIT ZONE
ZONE STATUS ON
SCAN STATUS ON
CLEAR ZONE
BACK EXIT
Figure 3-19
Zone Configuration
2.
Choose the zone number:
(1)
Move the cursor to
ZONE NUM
and click
IRIS+
button to enter the edit mode.
(2)
Click the up and down buttons to select the zone number to be configured.
(3)
Click
IRIS+
again to confirm the settings and exit edit mode of this column.
Summary of Contents for Mini Analog Speed Dome
Page 1: ...Mini Analog Speed Dome User Manual UD 6L0201D1200A01...
Page 42: ......