User Manual of Mini Analog Speed Dome
© Hikvision . All Rights Reserved.
26
MAIN MENU > DOME SETTINGS > PATROLS
PATROLS
PATROL NUM 1
EDIT PATROL
PREVIEW
CLEAR PATH
PATROL_D 30S
BACK EXIT
Figure 3-13
Patrol Configuration Menu
Choose the patrol number.
Steps:
(1)
Move the cursor to
PATROLS NUM
and click
IRIS+
to enter edit mode.
(2)
Click the up and down direction buttons to select the number of the patrol which is to be
configured.
(3)
Click
IRIS+
again to confirm the settings and exit edit mode of this column.
Note:
Up to 8 patrols can be configured.
Edit the patrol.
Steps:
(1)
Move the cursor to
EDIT PATROL
and click
IRIS+
to enter edit mode.
NUM PST DWELL SPD
1 0 6 30
2 0 6 30
3 0 6 30
4 0 6 30
5 0 6 30
6 0 6 30
7 0 6 30
DONE: OPEN QUIT:CLOSE
Figure 3-14
Edit the Patrol
(2)
Click up/down direction buttons to choose the number and locate the preset to be edited.
(3)
Click left/right direction buttons to position the cursor to the column of
PST
(PRESET),
DWELL
and
SPD
(SPEED). You can click the up/down direction buttons to set the value of preset
number, dwell time and patrol speed.
Note:
The presets you set for a patrol should be the ones that have been pre-defined by
users. The dwell time (5-800 seconds selectable) is the time that the speed dome stays on a
certain preset; the patrol speed (level 1-40 selectable) is the scanning speed the speed dome
switching between the presets.
(4)
Follow the above steps to define the other presets for the selected patrol. You can configure
Summary of Contents for Mini Analog Speed Dome
Page 1: ...Mini Analog Speed Dome User Manual UD 6L0201D1200A01...
Page 42: ......