User Manual of Mini Analog Speed Dome
© Hikvision . All Rights Reserved.
29
Steps:
1.
Move the cursor to enter the
TIME TASK
submenu:
MAIN MENU > DOME SETTINGS > TIME TASK
TIME TASK
TASK NUM 1
TASK STATE ON
TASK ACT NONE
TASK TIME
TASK PREVIEW
TASK CLEAR
BACK EXIT
Figure 3-17
Time Task Configuration Menu
2.
Choose the task number.
Steps:
(1)
Move the cursor to
TASK NUM
and click
IRIS+
to enter edit mode.
(2)
Click the up/down direction buttons to select the number of the task which is to be
configured.
(3)
Click
IRIS+
again to confirm the settings and exit the edit mode.
Note:
Up to 8 time tasks can be configured.
3.
Set the task status.
Steps:
(1)
Move the cursor to
TASK STATE
and click
IRIS+
to enter edit mode.
(2)
Click the up/down direction buttons to set the task status to
ON
.
(3)
Click
IRIS+
again to confirm the settings and exit edit mode of this column.
Note:
If the task action and task time have not been configured, you cannot set the status as
ON
.
4.
Configure the task action.
Steps:
(1)
Move the cursor to
TASK ACT
and click the
IRIS+
to enter edit mode.
(2)
Click the up and down direction buttons to select the task action from preset 1-8, pattern
1-4, patrol 1-8, pan scan, tilt scan, random scan, frame scan, panoramic scan, day mode,
night mode, patrol-d and none.
(3)
Click
IRIS+
again to confirm the settings and exit edit mode of this column.
5.
Set the task time.
Steps:
(1)
Move the cursor to
TASK TIME
and click
IRIS+
to enter edit mode.
(2)
Click the left and right direction buttons to position the cursor to
WEEK
,
START (H-M)
and
END (H-M)
.
(3)
Click the up and down direction buttons to set the start time and end time to run the time
task.
Summary of Contents for Mini Analog Speed Dome
Page 1: ...Mini Analog Speed Dome User Manual UD 6L0201D1200A01...
Page 42: ......