HIKVISION Mini Analog Speed Dome, User Manual, Page: 24 / 42

User Manual of Mini Analog Speed Dome
© Hikvision . All Rights Reserved.
23
3.4 Configuring PTZ Control Parameters
Purpose:
You can configure panning, tilting and zooming movements, and configure PTZ control functions
including presets, patrols, patterns, etc. for the speed dome.
；
3.4.1 Configuring PTZ Parameters
Enter PTZ configuration menu:
MAIN MENU > DOME SETTINGS > MOTION PARAMETER
MOTION
AUTO FLIP ON
PROPORTIONAL PAN ON
PARK TIME 5
PARK ACT NONE
SCAN SPEED 28
IMAGE FREEZE OFF
DOME SPEED 6
BACK EXIT
MOTION
PRESET SPEED 4
LIMIT STOP OFF
<SETTING STOPS>
CLEAR STOPS
ELEVATION SET ON
BACK EXIT
Figure 3-11 PTZ Configuration

Auto-flip
In manual tracking mode and when this function is on, if a target object goes directly beneath the
speed dome, the speed dome automatically rotates 180 degrees horizontally for tracking.

Proportional Panning
When the speed dome is zooming in/out, you can enable the proportional panning function to
automatically reduce or increase the panning and tilting speed according to the zooming amount.
This function enables the speed dome to trace the object at a proper speed when the speed dome
is zooming and the monitored scene is narrowed (zoom in) or enlarged (zoom out).
You can set
PROPORTIONAL PAN as ON or OFF to enable/disable the function.
Note: This function is enabled automatically while setting the patterns.

Park time and actions
Purpose:
This feature allows the speed dome to start a predefined action (park action: scan, preset, pattern,
etc.) automatically after a period of inactivity (park time).
You can set
PARK TIME from 5 to 720 seconds and set the park action ( PARK ACT ) as preset 1-8,
pattern 1-4, patrol 1-8, pan scan, tilt scan, random scan, frame scan, panoramic scan, day mode,
night mode, patrol-d or none.
Note: If no control signal is received after the park time under the following circumstances, no park
actions will be performed: in the process of performing dome actions by calling special presets.