Before You Start
The listening service has been enabled for the listening host, and the network communication with
the device is normal.
Steps
1. Go to Configuration → Device Configuration → System → Network Interface Parameters .
Figure 6-3 Set Listening Host
2. Set ANPR IP Address/Domain and ANPR Port if you need to upload the alarm information and
pictures.
3. Set Listening Host IP Address/Domain and Listening Host Port, and check Enable Picture
Uploading Listening if you need to upload the alarm information and pictures.
Note
ANPR and listening conflict with each other. When you enable listening host, pictures will be
uploaded via listening host in priority. When you disable listening and have set ANPR IP address
and port, pictures will be uploaded via ANPR protocol.
4. Optional: Set Preferred DNS Address if you need to visit the device with domain name.
5. Optional: Set Multicast Address if you need to preview the picture via the multicast group.
6. Click Save.
6.1.4 Set Cloud Storage
Cloud storage is a kind of network storage. It can be used as the extended storage to save the
captured pictures.
Before You Start
●
Arrange the cloud storage server.
●
You have enabled level 1 arm in Real-Time Status and Traffic Flow Statistics.
Note
The real-time status and traffic flow statistics should be used with dedicated platform.
All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual
34
