Close Range Capture
Check it and set Capture Interval. The device will track the target until one more picture is
captured in close distance according to the capture interval.
6. Check the event(s) to be detected, and set the corresponding parameters.
Note
The supported events vary with different models. The actual device prevails.
Sensitivity
The higher the sensitivity is, the more possibly the detected target will be judged as the
violation vehicle. If the value is too high, mistaken alarms may be triggered. If the value is too
low, there may be missing alarms. Set the value reasonably according to the actual needs.
Alarm Interval
The interval between two alarms.
Duration
When the selected event lasts for the set duration, the vehicle is judged as the violation
vehicle.
Vehicle Speed Threshold
It is used to judge if the vehicle is driven in the speed faster than the set threshold.
Display Vehicle Distance
Check it to display vehicle distance on the captured picture.
Vehicle Distance in High Speed
The allowable minimal distance between two vehicles driven on the same lane at high speed.
Vehicle Distance in Low Speed
The allowable minimal distance between two vehicles driven on the same lane at low speed.
Number of Vehicles Overtaking Simultaneously
The maximal number of vehicles overtaking at the same time.
Congestion Duration
When the congestion duration exceeds the set value, the lane will be judged as congested.
Linked Area
Check the lane area(s) to link to the corresponding events.
Speed Limit for Small-Sized Vehicle
The upper speed limit for small-sized vehicles on the lane.
Speed Limit for Large-Sized Vehicle
The upper speed limit for large-sized vehicles on the lane.
Enable Speed Limit for Non-Motor Vehicle
Check it to set upper speed limit for non-motor vehicles according to actual needs.
All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual
14
