Figure 3-3 Auto Calibration
3. Draw the lane lines.
1) Select the lane sum.
2) Select the lane line No.
3) Click Draw Lane Line.
The selected lane line will be displayed on the live view picture.
4) Drag the two end points of the line or drag the whole line to adjust its position according to
the actual scene.
5) Repeat the steps above to draw more lane lines.
4. Click Start.
The auto calibration starts, and you can view the calibration status and progress. 100% means
the auto calibration is finished.
5. Optional: Click End if the calibration effect has met the requirement during the process.
6. Optional: Click Copy Parameters to Coordinate Mode to copy the auto calibrated coordinates to
the coordinate mode.
7. Click Save.
3.2.3 GPS Coordinate Calibration
The coordinates of vehicle positions can be converted to GPS coordinates to satisfy the
requirements of third party or other platforms.
All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual
10
