HIKVISION iDS-8104AHQXLI-E4 User Manual Download Page 9

Page: 9 / 224

ATM Digital Video Recorder User Manual



Clear-text password available.



GUID file can be exported for password resetting.



Multiple connected analog cameras supporting HDTVI signal can be upgraded simultaneously
via DVR.

Network Functions



2 self-adaptive 10M/100M/1000M network interfaces, and three working modes are
configurable: multi-address, load balance and network fault tolerance.



IPv6 is supported.



TCP/IP protocol, PPPoE, DHCP, DNS, DDNS, NTP, SADP, SMTP, SNMP, NFS and ISCSI are
supported.



TCP, UDP and RTP for unicast.



Auto/Manual port mapping and automatically discovered by NAT.



Remote web browser access by HTTPS ensures high security.



Remote reverse playback by RTSP.



Supports accessing by the platform by ONVIF.



Remote search, playback, download, locking and unlocking the record files.



Remote parameters setup; remote import/export of device parameters.



Remote viewing of the device status, system logs and alarm status.



Remote keyboard operation.



Remote locking and unlocking of control panel and mouse.



Remote HDD formatting and program upgrading.



Remote system restart.



RS-232, RS-485 transparent channel transmission.



Alarm and exception information can be sent to the remote host



Remotely start/stop recording.



Remotely start/stop alarm output.



Upgraded by remote FTP server is supported.



Remote PTZ control.



Remote JPEG capture.



Two-way audio and voice broadcasting.



Configurable output bandwidth limit.



If DHCP is enabled, you can enable DNS DHCP or disable it and configure the Preferred DNS
Server and Alternate DNS Server.



Embedded WEB server.

Development Scalability

Summary of Contents for iDS-8104AHQXLI-E4

































































































































































































































Search results

Summary of Contents for iDS-8104AHQXLI-E4

Reviews:

Related manuals for iDS-8104AHQXLI-E4

Brands by name

Popular brands

HIKVISION iDS-8104AHQXLI-E4, User Manual

Search results

Summary of Contents for iDS-8104AHQXLI-E4

Reviews:

Related manuals for iDS-8104AHQXLI-E4

Brands by name

Popular brands