HIKVISION iDS-8104AHQXLI-E4 User Manual Download Page 109

Page: 109 / 224

ATM Digital Video Recorder User Manual

108

Figure 6-21

Interface of External File Playback

6.1.9 Playing Back Pictures

Purpose

The captured pictures stored in the HDDs of the device can be searched and viewed.

Step 1

Enter Playback interface.

Menu>Playback

Step 2

Select

Picture

from the drop-down list in the upper-left corner of the page to enter the

Picture Playback interface.

Step 3

Check the checkbox to select the channel and specify the start time and end time for search.

Step 4

Click

Search

to enter Search Result interface.

Up to 4000 pictures can be displayed each time.

Step 5

Select a picture you want to view and click

You can click

Back

to return to the search interface.

Summary of Contents for iDS-8104AHQXLI-E4

































































































































































































































Search results

Summary of Contents for iDS-8104AHQXLI-E4

Reviews:

HIKVISION iDS-8104AHQXLI-E4, User Manual, Page: 109 / 224

Search results

Summary of Contents for iDS-8104AHQXLI-E4

Reviews: