DS-PRI120 Security Radar User Manual
UM DS-PRI120 091720NA
27
Chapter 5 Camera Linkage Settings
The radar can work with cameras such as speed dome and box camera for target tracking and video recording.
5.1
Set Speed Dome Initial Position
Set the initial position of the speed dome to ensure the tracking accuracy.
1.
Select a reference object approximately 50 m away from the speed dome. On the reference object, select a
reference point whose altitude is the same as the speed dome’s.
2.
Enter the IP address of the speed dome in a Web browser to enter the Web client. Adjust the PTZ buttons
to make sure that the reference point is displayed in the live view window. Click
to enable 3D location,
click the reference point and the point will be in the middle of the frame.
Figure 5-1 Reference Point Position
If the speed dome is installed tilted, after you click , you may find the reference point is
above the center of the frame or is outside the frame. In this case, adjust the speed dome’s
maximum elevation angle. For detail adjustment method, see
How to Solve the Problem
that No Reference Point is on the Frame While Setting the Speed Dome Initial Position?
If the maximum elevation angle of the speed dome is adjusted, the reference point needs to
be adjusted to the center of the frame again.
PTZ
: Pan /tilt /zoom.
3.
Enter the
Configuration
→
PTZ
→
Initial Position
page, and click
Set
to set the initial position.
