HIKVISION DS-PR1-60, User Manual, Page: 66 / 71

DS-PR1-60 User Manual
UM DS-PR1-60 090920NA 66
D.7 What Makes a Failed Arming?
The following two conditions will make a failed arming:
• In the Radar page, if there is a moving target in the warning zone when you click → Arm to arm radars, it
is impossible to enable mandatory arming, resulting in failed arming.
• The current status of radar is offline.
D.8 Why Is It Required to Remove Reflective Objects from the Radar Area?
• When there are reflective objects in the radar application scene such as flat glass or large-area metal
objects, the radar will produce multipath effects, that is, the people reflect the signal from the radar to the
large-area metal objects or flat glasses, and the large-area metal objects or flat glasses reflect the signal
again to the receiving end of the radar, thus there will be a false alarm. Since the glasses are flat and the
reflection is concentrated, there may be a false alarm when there are glasses in the radar scene.
• The higher the sensitivity, the more probability a false alarm will be triggered.
D.9 Why Is the Camera Unable to Track the Target?
• The camera is not calibrated.
• The camera is not linked to the zone.
D.10 Common Mistakes of Calibrating Camera
Prompt when selecting target: Please select the calibration target trajectory.
Reason: Target not selected or disappeared when acquiring parameters.
Solution: Select the moving target for parameter acquisition.
Prompt when adding calibration points: Error in parameter range, illegal range: T <=0.
Reason: The angle of pitch, T, of the speed dome is less than or equal to 0.
Solution: Adjust the angle of pitch of the speed dome so that T is greater than 0.
Prompt when adding calibration points: Incorrect Parameters.
Reason: The status of the linked camera device is offline.
Solution: Reconnect the camera. Make the status of the camera is online to continue calibration.