HIKVISION DS-PR1-60, User Manual, Page: 50 / 71

DS-PR1-60 User Manual
UM DS-PR1-60 090920NA 50
Chapter 8 Alarm Settings
8.1 Alarm Center
You can set the alarm center’s parameters and all alarms will be sent to the configured alarm center.
1. Select the radar and click in the client software, or enter the radar IP address in the address bar of the
Web browser. Click Communication Parameters → Alarm Center Parameters to enter the Alarm Center
Settings page.
Figure 8-1 Alarm Center Parameters
2. Select
Center Group
, and slide the slider to enable the center group. The alarm information will be
uploaded to the selected center group.
3. Select
Protocol Type
from the drop-down list, select
Server Address Type
from the drop-down list, enter
the server address, port No., and the user name.
The protocol type NAL2300 is the Hikvision private protocol.
4. Click
Save
.
8.2 Notification Push
When an alarm is triggered, if you want the send the alarm notification to the client, alarm center, cloud or
mobile client, you can set the notification push parameters.
1. Select the radar and click in the client software, or enter the radar IP address in the address bar of the
Web browser. Click Communication Parameters → Message Notification .